收藏本站
DATASHEET
Display
Through-hole
ELB-1010SURD/S530-A3
Application Restrictions
1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT will
reserve authority on material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in
these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the
product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don’t
reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
4. ESD (Electrostatic Discharge)
The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly
recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
Proper grounding is required for all devices, equipment, and machinery used in product assembly.
Surge protection should be considered when designing of commercial products.
If tools or equipment contain insulating materials such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
Preventing charge generation with moisture
Neutralizing the charge with ionizers
5. The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not
subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, it may
cause migration resulting in LED damage.
6
Copyright ? 2010, Everlight All Rights Reserved. Release Date : Feb. 17, 2014 Issue No : DDF-0001965 Rev.3
www.everlight.com
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EM250-BBRD-R EM250 BREAKOUT BOARD
EM260-BBRD-128K-USART-R EM260 BREAKOUT BOARD
EM35X-NCP-ADD-ON-S EM35X ADD ON KIT
EM6J1T2R MOSFET 2P-CH 20V 200MA EMT6
EM6K6T2R MOSFET 2N-CH 20V 300MA EMT6
EM6K7T2R MOSFET 2N-CH 20V 200MA EMT6
EM6M1T2R MOSFET N/P-CH 30V .1A EMT6
EM6M2T2R MOSFET N/P-CH 20V 200MA EMT6
相关代理商/技术参数
ELB-1010SURD-S530-A3 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:12.8 * 6.3mm Light Bars
ELB-1010SURWA/S530-A3 功能描述:LCD 数值显示模块 Light Bar Display RoHS:否 制造商:Lumex 显示模式:Reflective 数位数量:4 字符计数 x 行:4 x 1 字符大小:0.71 in 流体类型:TN 背景色:Gray 封装:
ELB1010SURWA/S530-A3 制造商:Everlight Electronics Co 功能描述:LIGHT BAR DISPLAY HYPER-RED ALLNGAP - Bulk
ELB-1010SYGD/S530-E2 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:12.8 * 6.3mm Light Bars
ELB-1010SYGD-S530-E2 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:12.8 * 6.3mm Light Bars
ELB101100 功能描述:CONN TERM BLK CARD EDGE 10POS RoHS:是 类别:连接器，互连式 >> 接线板 - 适配器 系列:ELECTROCON ELB 标准包装:1 系列:VARIOFACE, FLKM 转换源（适配器端）:PLC TI 505 转换到（适配器端）:矩形连接器，50 位置，2 排 安装类型:板式安装 线规:- 其它名称:FLKM50-PA-TI/505/I/O
ELB-1015UYWW/S530-A3/L18 制造商:Everlight Electronics Co 功能描述:Single Element Yellow Light Bar 9.9 x 9.9 mm Display
ELB-1020-211SL-24D14 制造商:Amphenol Corporation 功能描述:ELB-1020-211SL-24D14 - Bulk